Skip to main content
AgoraStream

Setup Procedure · Estimated Time: 6 minutes

How to Set Up AgoraStream on Apple TV 4K

Quick Answer

To set up AgoraStream on Apple TV 4K, update to tvOS 16 or newer, verify a wired Ethernet or 5 GHz Wi-Fi connection above 25 Mbps, install the verified AgoraStream app from the tvOS App Store, and pair your account using the on-screen 6-character activation code.

Written by Marcus Chen (Device Compatibility Engineer)Reviewed by Nadia Okafor2 technical sources cited

Before You Begin (Prerequisites)

  • Apple TV 4K (1st, 2nd, or 3rd generation) running tvOS 16.0 or newer.
  • Active residential internet connection (15 Mbps minimum for HD; 25+ Mbps for 4K).
  • Active AgoraStream subscription credentials (available once account portal launches).

Step-by-Step Setup Instructions

  1. Step 1 of 4

    Update tvOS system software

    Open Settings > System > Software Updates > Update Software and install any pending tvOS releases.

    Verify: Confirm tvOS version reads 16.0 or higher under Settings > General > About.

  2. Step 2 of 4

    Verify network link quality

    Connect a Cat6 Ethernet cable (on Ethernet-equipped models) or join your router 5 GHz SSID under Settings > Network.

    Verify: Ensure signal strength shows full bars or Wired Connection active.

  3. Step 3 of 4

    Enable dynamic range and frame rate matching

    Navigate to Settings > Video and Audio > Match Content and set both Match Dynamic Range and Match Frame Rate to On.

    Verify: Prevents 50Hz/24fps broadcast judder when tvOS defaults to 60Hz.

  4. Step 4 of 4

    Install and activate AgoraStream

    Open the tvOS App Store, search for AgoraStream, install the verified app, and enter the displayed activation code on a second device.

    Verify: The EPG channel grid loads automatically after device pairing completes.

Additional Hardware Notes

  • Avoid enabling VPN profiles on Apple TV unless required by your network administrator, as extra hops can degrade adaptive bitrate selection.
  • If using an external HomePod stereo pair, verify Wireless Audio Sync under Settings > Video and Audio.

Frequently Asked Questions

How long does initial EPG sync take on Apple TV 4K?
Initial Electronic Program Guide indexing typically finishes within 10 to 20 seconds on a broadband connection.
Can I sign in with the Apple TV remote instead of a QR code?
Yes. You can either scan the on-screen activation code or enter your email and password directly via the tvOS on-screen keyboard or iPhone continuity keyboard.

Sources Cited