Skip to main content
AgoraStream

Setup Procedure · Estimated Time: 6 minutes

How to Configure LG webOS Smart TV for AgoraStream

Quick Answer

Update your LG TV to the latest webOS 6.0+ firmware, connect to a 5 GHz Wi-Fi network for higher-than-100Mbps burst bandwidth (or Ethernet for stability), free background memory by toggling Quick Start+ off if needed, and install AgoraStream via the LG Content Store.

Written by Elena Vance (Lead Streaming Systems Editor)Reviewed by Nadia Okafor1 technical sources cited

Before You Begin (Prerequisites)

  • LG Smart TV (2021 or newer, webOS 6.0+)
  • LG Account signed into the LG Content Store.

Step-by-Step Setup Instructions

  1. Step 1 of 3

    Check webOS software updates

    Press the Settings gear on your Magic Remote, open All Settings > Support > Software Update, and run Check for Updates.

    Verify: Modern TLS certificates require current webOS firmware.

  2. Step 2 of 3

    Select optimal network interface

    Under All Settings > General > Network, connect to your 5 GHz Wi-Fi band if the router is in the same room, or Wired Connection if walls attenuate Wi-Fi.

    Verify: Note that LG TV wired ports are typically 100 Mbps, which still supports most streams cleanly.

  3. Step 3 of 3

    Install AgoraStream from LG Content Store

    Launch LG Content Store from the Home launcher, install AgoraStream when listed, and pair via QR code.

    Verify: Pin the app to your quick-access launcher row.

Additional Hardware Notes

  • Turn off TruMotion / soap-opera interpolation if live sports or cinema pans stutter.

Frequently Asked Questions

My LG TV is from 2019 (webOS 4.5). Can I still stream?
Older webOS 4.x models are not guaranteed for native app certification. Connecting an external streaming box such as Apple TV 4K or Fire TV Stick 4K Max via HDMI provides stronger codec support and faster EPG browsing.

Sources Cited